Product Introduction

Charcoal stick briquette machine can be charcoal powder, carbon residue, bamboo charcoal, coconut husk charcoal, rice husk charcoal and other raw materials can be extruded. The finished rods produced can be used for various environmental protection applications such as barbecues and heating, and are also widely used in industries such as chemical, metallurgy and ceramic firing.

Working principle

When the charcoal stick briquette machine is working, the materials after bonding and mixing are fed into the feeding barrel. Under the action of the motor and the reducer, the pulverized coal at the rear of the barrel is strongly pushed forward by the screw, and the pulverized coal is compressed and formed by the forming barrel. , And finally extrude from the die hole of the front head.

Spiral: thickened castings, pouring molding, level four.

Molding cylinder: thick casting, good wear resistance, not easy to break.

Mold: No. 45 carbon steel, good wear resistance, not easy to break.

Base: National standard thickened square steel, good stability.

Advantages

1. The feed screw lead is large, the feed is fast, and the advancing screw lead is small, which saves power.

2. The shaft seat and the cylinder are rigidly connected, with high concentricity, anti-reverse thrust, and the machine is stable.

3. The connection of each part of the equipment is connected by bolts, and the four-stage spiral is connected by buckles, which is convenient for customers to replace and maintain.

4. Large output, high efficiency, low investment, and small floor space.

5. The mold can be customized according to customer requirements, the diameter can be 50mm, 60mm, 70mm, 80mm, and the length can be adjusted by yourself.